Doors

SAPA 2086

Door with FIX bracket

High insulated door

Characteristics

The Door 2086 with FIX bracket system is a part of our Thermo 86 systems and is based on a strong and stable construction with 86 mm deep profiles. These are basic insulated with 42 mm glass fibre reinforced polyamide strips and filled with specially developed insulating rods Sapa Thermo N9 for optimal energy performance. The system offers very good air and rain tightness. Door leaf profiles are available for narrow and module locks as well as with anti-finger trap. Rebate for glass and infill panels 22-56 (64) mm.

This door which provides safe operation and long service life is perfectly suitable for busy public environments requiring high thermal insulation and air and rain performance.

Operated with the handle of the Spaniard. With the handle in the closed position, the arc with friction is held in the desired ventilation position. In order to spare the arch and the hinges, the window brake slips when overloaded. With the handle in the open position, the bow has clearance. The retention friction increases at a larger opening angle.

The Spanjolette comes with multi-point locking, for better burglary protection and tightness.

This product is made of Hydro REDUXA® - Aluminum produced from renewable energy. Read more here

Documentation

More information

Fitting Functions

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

 

A = Clear dimension
B = Frame outside dimension
C = Wall opening

D with universal hinge= 151 mm
D with lap but hinge= 145 alt. 148 mm with replaceable rebate profiles
E = 67 mm or 70 mm with replaceable rebate profiles

 

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions
Glass thickness 20-64 mm

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.


Infill panels

Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels.

The example shows infill panel F2

Infill panel F1
1,5 mm aluminium sheet
60 mm insulation
1,5 mm aluminium sheet
U-value at middle point down to 0,54 W/m²K.
For areas with little mechanical impact, such as high-level infill panels.

Infill panel F2
1,5 mm aluminium sheet
4,8 mm board
50 mm insulation
4,8 mm board
1,5 mm aluminium sheet
U-value at middle point down to 0,61 W/m²K.
For areas with moderate mechanical impact, such as low-level infill panels.

Infill panel F3
1,5 mm aluminium sheet
50 mm insulation
10 mm chip board
1,5 mm aluminium sheet
U-value at middle point down to 0,61 W/m²K.
For areas with high mechanical impact from outside.

Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Our standard fittings are shown below.

Hinges, examples


Universal hinge.

Lap butt hinge.

Hidden hinge.

Elevations And Details

A2086-1001 21222324
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1002 12212223243
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1003 1221222324346
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1004 2122247
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1005 122122232437
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1006 122122232436678
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1007 31323334
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1008 12331323334
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1009 1233132333446
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1010 3132347
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1011 123313233347
Save this elevation as: dwg / dxf
Click on number to view the details
A2086-1012 123313233346678
Save this elevation as: dwg / dxf
Click on number to view the details

Fixing Principles

Fixing principles

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Examples:


Frame attachment with
dual screws

Frame attachment with
adjustable frame bushing

Frame attachment with
bolt and welded plate

Frame attachment with
screw


Projects using doors SAPA 2086

Villa, Finland

Tramway, Lund

Sweden

Developer: Region Skåne / Lunds Kommun
Construction contractor: NCC Building Sweden
Metal builder: Alab Aluman AB
SAPA solutions: Facade 4150, Doorr 2086, Window 1086

Lindesberg Hälsocenter

Sweden

Architect: White Architects
Metal builder: Glaslindberg Facade
Products: Facade SAPA: 4150, Roof: SAPA 5050, Doors SAPA 2086 & SAPA 2050
Photo: Åke E:son Lindman &White 

Silberauto, Klaipeda

Facility: Silberauto
Place: Klaipeda, Lithuania
Architect: A405 Architects
Manufacturer: GS Industry UAB
Installer: Eugvilsta UAB

Facades: Sapa 4150
Doors: Sapa 2086 and Sapa 2074
Windows: Sapa 1074

Photography: Evaldas Lasys