Windows / French Windows

SAPA 1086

Window - inward opening

Super-insulated inward opening window

Characteristics

Window 1086 is based on a strong and stable construction with 86 mm deep profiles. These are basic insulated with 42 mm glass fibre reinforced polyamide strips. For optimized energy performance it can be fitted with special insulation strips SAPA Thermo N9 and is then called Window 1086 SX. 1086 and 1086 SX rebate for glass 22-56 (64) mm, 1086 PX 35-55 mm. The window can be easily combined with Glazed Element 3086.

This product is made of Hydro REDUXA® - Aluminum produced from renewable energy. Read more here

Documentation
SAPA 1086_SX_PX_DataSheet_BA.pdf

Product benefits

DIVERSITY OF APPLICATIONS

  • Single window, meeting windows or as an element combining opening and a fixed window.
  • Fittings. Side, bottom, top-hung or tilt and turn.
  • Hinges. Hidden or visual.

HIGH PERFORMANCE

  • Air-permeability. Class 4 according to EN 12207
  • Water tightness Class 9A according to EN 12208
  • Sound reduction. Up to Rw 45 dB.

HIGH PERFORMANCE

  • U-value. Down to 0,8 W/m²K (PX, inward opening Ug=0,5 W/m²K, dimension 1230x1480 mm).

More information

Fitting Functions

Window location in structure

For the entire window structure to meet the energy saving requirements and ensure good comfort it is necessary to install the window in the warm part of the wall. This means that it should be installed as deep into the wall as possible, which has a number of advantages.

It creates good conditions for appropriate fixing and a well functioning joint. The risk of condensation is reduced due to a higher surface temperature. The joint between the frame profile and the wall shall be made with two step sealing. This means that it should consist of an outer rain barrier with an underlying air channel, a mineral wool insulation layer and an inner diffusion sealing joint.

Connections, see Elevations and details.

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions
Glass thickness: 1086 and 1086 SX 20-56 (64) mm, 1086 PX 35-55 mm.



The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Fitting functions

Top-hung, inward opening

Closed

Open, top-hung

Notter AL 18 closing fittings alt concealed hinges Notter AL18 VDL
x6661259 handle
x6661261 lockable handle
Sapa S16439 handle
Sapa S16439 handle with S16441 child safety lock
Sapa S16438 lockable handle

Tilt and turn, inward opening

Closed

Ventilation, bottom-hung

Open, side-hung

Notter AL 18 closing fittings alt concealed hinges Notter AL18 VDL
x6661259 handle
x6661261 lockable handle
Sapa S16439 handle
Sapa S16439 handle with S16441 child safety lock
Sapa S16438 lockable handle

Side-hung, inward opening

Closed

Open, side-hung

Notter AL 18 closing fittings alt concealed hinges Notter AL18 VDL
x6661259 handle
x6661261 lockable handle
Sapa S16439 handle
Sapa S16439 handle with S16441 child safety lock
Sapa S16438 lockable handle

Bottom - hung, inward opening

Closed

Open, bottom-hung

Notter AL 18 closing fittings
x6661259 handle
x6661261 lockable handle
Sapa S16439 handle
Sapa S16439 handle with S16441 child safety lock
Sapa S16438 lockable handle

Handle

Aluminium handle
Art.no.: Sapa 16439

Aluminium handle with child safety lock
Art.no.: Sapa 16439 Child safety lock Sapa 16441

Lockable aluminium handle
Art.no.: Sapa 16438

Aluminium handle
Art.no.: Sapa 16126

Lockable aluminium handle
Art.no.: Sapa 16131



Window location in structure

For the entire window structure to meet the energy saving requirements and ensure good comfort it is necessary to install the window in the warm part of the wall. This means that it should be installed as deep into the wall as possible, which has a number of advantages.

It creates good conditions for appropriate fixing and a well functioning joint. The risk of condensation is reduced due to a higher surface temperature. The joint between the frame profile and the wall shall be made with two step sealing. This means that it should consist of an outer rain barrier with an underlying air channel, a mineral wool insulation layer and an inner diffusion sealing joint.

Connections, see Elevations and details

Elevations And Details

A1086-1001 123
Save this elevation as: dwg / dxf
Click on number to view the details
A1086-1004 110356
Save this elevation as: dwg / dxf
Click on number to view the details
A1086-1005 6717274
Save this elevation as: dwg / dxf
Click on number to view the details
A1086-1006 12371727374
Save this elevation as: dwg / dxf
Click on number to view the details
A1086-1007 71727475
Save this elevation as: dwg / dxf
Click on number to view the details
A1086-1009 11037172737475
Save this elevation as: dwg / dxf
Click on number to view the details

Fixing Principles

Fixing principles

Windows must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the window.

Exemple:
  
Fixing of frame with
twist
anchor

Fixing of frame with
adjustable frame bushing

Fixing of frame with
bolt and welded plate

Projects using windows / french windows SAPA 1086

Tramway, Lund

Sweden

Developer: Region Skåne / Lunds Kommun
Construction contractor: NCC Building Sweden
Metal builder: Alab Aluman AB
SAPA solutions: Facade 4150, Doorr 2086, Window 1086