Doors

SAPA 2086

Sliding Door, Automatic

Store entrances automatic sliding doors

Characteristics

Our automatic 2086 sliding doors are insulated and based on a stable solution. The profiles has a profile depth of 86 mm and uses 30 mm wide glass fibre reinforced polyamide strips. The fixed parts can be made of the system 3086 (the most common choice) or the façade systems 4150, 4150 SX, 4150 SSG och 5050 SG. In 3086 system the top frame element can be made of different profiles adapted for various automatic devices available on the market.

This product is made of Hydro REDUXA® - Aluminum produced from renewable energy. Read more here

Documentation

Product benefits

DIVERSITY OF APPLICATIONS

  • Single-wing, double-wing.
  • Locks. The door leaf can be equipped with locks in the front and the back edge.

DIVERSITY OF APPLICATIONS

  • Application areas. Entries and interior doors for use in very frequented places as well as for passage with shopping trolleys, prams, etc.

DIVERSITY OF APPLICATIONS

  • Automatic systems. These can be adapted to the required functions and the customer's special needs. See information provided by the suppliers of automatic systems

More information

Fitting Functions

Clear dimension

When calculating the clear dimension we have taken into account the risk for squeeze injuries at the door leaf back edge.

Single-wing door

F.O = Clear dimension
K.Y.M = Frame outside dimension
Max. clear dimension = (Frame outside dimension - 350) / 2
Min. frame outside dimension = 2 x Clear dimension + 350

Double-wing door

F.O = Clear dimension
K.Y.M = Frame outside dimension
Max. clear dimension = (Frame outside dimension - 565) / 2
Min. frame outside dimension = 2 x Clear dimension + 565

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions
Glass thickness 20-54 mm

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.


Glazing
Glass thickness 20-54 mm


Double glazing unit

Triple glazing unit

Infill panels

Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.

Infill panel F2
U value in the middle: 0.74 W/m2K
1,5 mm Aluminium sheet
4,8 mm Board
40 mm Insulation
4,8 mm Board
1,5 mm Aluminium sheet


Infill panel F3
U value in the middle: 0.74 W/m2K
1.5 mm Aluminium sheet
10 mm Chipboard
40 mm Insulation
1.5 mm Aluminium sheet


Infill panel F4
U value in the middle: 0.74 W/m2K
1.5 mm Aluminium sheet
40 mm Insulation
10 mm Sapa boarding

Automatic devices for sliding doors

These can be adapted to the required functions and the customer's special needs. For more information refer to the product descriptions provided by the suppliers of automatic systems.

Elevations And Details

A2074-1127 12344142434456
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1128 12341424467
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1140 1234142434456
Save this elevation as: dwg / dxf
Click on number to view the details
A2074-1141 12341424467
Save this elevation as: dwg / dxf
Click on number to view the details

Fixing Principles

Fixing principles

For a folding door to function in a satisfactory manner it is important that the fixing elements and the base structure along the top edge and the side are stable. The rail profile used for hanging up the door leaf fittings must be well anchored so that the clearance between the door leafs and the floor is sufficient.

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Frame attachment with
adjustable frame bushing

Frame attachment with
screw

Frame attachment with
twist anchor

Frame attachment with
bolt and welded plate

Projects using doors SAPA 2086

Villa, Finland

Tramway, Lund

Sweden

Developer: Region Skåne / Lunds Kommun
Construction contractor: NCC Building Sweden
Metal builder: Alab Aluman AB
SAPA solutions: Facade 4150, Doorr 2086, Window 1086

Lindesberg Hälsocenter

Sweden

Architect: White Architects
Metal builder: Glaslindberg Facade
Products: Facade SAPA: 4150, Roof: SAPA 5050, Doors SAPA 2086 & SAPA 2050
Photo: Åke E:son Lindman &White 

Silberauto, Klaipeda

Facility: Silberauto
Place: Klaipeda, Lithuania
Architect: A405 Architects
Manufacturer: GS Industry UAB
Installer: Eugvilsta UAB

Facades: Sapa 4150
Doors: Sapa 2086 and Sapa 2074
Windows: Sapa 1074

Photography: Evaldas Lasys