Folding Doors / Windows

SAPA 2050

Folding Door

Non-insultated folding door

Characteristics

Our 2050 folding doors are based on a stable solution with a possibility of several different add-on functions. The system is based on uninsulated aluminium profiles with a profile depth of 50 mm. The door leafs are interconnected with hinges on the inside or the outside and hang on roller fittings along the top edge. The door is opened by folding the door leafs together on the inside or the outside to form a package by the frame side.

This product is made of Hydro REDUXA® - Aluminum produced from renewable energy. Read more here

Documentation

Product benefits

DIVERSITY OF APPLICATIONS

  • Outward or inward opening doors where the hinge location determines the function. See Elevations and details for more information on different combination possibilities

DIVERSITY OF APPLICATIONS

  • Application areas. Stable system suitable for use in very frequented entrances as well as for passage with shopping trolleys, prams, etc.

LARGE SIZES

  • Dimensions. Door leaf height up to 2500 mm and door leaf width max. 1000 mm

More information

Fitting Functions

Clear dimension

Clear dimension values apply to both inward and outward opening folding doors.

Three door leafs, 321

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 320

Three door leafs, 330

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 362

Four door leafs, 431

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 410

Five door leafs, 541

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 500

Five door leafs, 550

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 542

Six door leafs, 633

D = Passage door
F.O. = Clear dimension = Frame outside dimension - 590

Threshold alternatives


Outward opening folding door with threshold


Outward opening folding door without threshold


Inward opening folding door with threshold


Inward opening folding door without threshold

Glazing

Unprotected glazed surfaces which are so located that they can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions
Glass thickness 5-33 mm

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.


Glazing
Glass thickness 5-33 mm

Infill panels

Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.

Infill panel F2
1,5 mm Aluminium sheet
3,2 mm Board
25 mm Insulation
3,2 mm Board
1,5 mm Aluminium sheet


Infill panel F3
1,5 mm Aluminium sheet
12 mm Chipboard
20 mm Insulation
1,5 mm Aluminium sheet


Infill panel F4
1,5 mm Aluminium sheet
20 mm Insulation
10 mm Sapa boarding

Elevations And Details

A2050-1024 13313233347
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1025 13313233347
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1026 1313313233347
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1027 13133132333477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1028 13133132333477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1029 1313133132333477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1018 13212223247
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1019 13212223247
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1020 132122232477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1021 13132122232477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1022 13132122232477
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1023 131321222324777
Save this elevation as: dwg / dxf
Click on number to view the details

Fixing Principles

Fixing principles

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Examples:

Frame attachment with
twist anchor

Frame attachment with
adjustable frame bushing

Frame attachment with
bolt and welded plate

Frame attachment with
screw