To view the content, please enable marketing cookies by clicking on the button below.
Cookie settings
Glazed Elements 3086 have 86 mm deep aluminium profiles. These have basic insulation, with 42 mm of glass fibre reinforced polyamide strips. For optimum energy performance, choose Glazed Element 3086 SX with SAPA Thermo N9 insulating strips in profiles. Rebate for glass 20–56 (64) mm.
Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.
Functional dimensions
Glass thickness 20-64 mm
The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.
Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels.
The example shows infill panel F2
Infill panel F1
1,5 mm aluminium sheet
60 mm insulation
1,5 mm aluminium sheet
U-value at middle point down to 0,54 W/m²K.
For areas with little mechanical impact, such as high-level infill panels.
Infill panel F2
1,5 mm aluminium sheet
4,8 mm board
50 mm insulation
4,8 mm board
1,5 mm aluminium sheet
U-value at middle point down to 0,61 W/m²K.
For areas with moderate mechanical impact, such as low-level infill panels.
Infill panel F3
1,5 mm aluminium sheet
50 mm insulation
10 mm chip board
1,5 mm aluminium sheet
U-value at middle point down to 0,61 W/m²K.
For areas with high mechanical impact from outside.
