Doors

SAPA 2050

Door Design glazing beads

Doors with design variations

Characteristics

This door system is based on uninsulated aluminium profiles with a profile depth of 50 mm. Symmetrically installed glazing unit with three alternative glazing beads: L-shaped, façade type and rectangular.

The frame profile has a fixed rebate profile. Door leaf profiles for narrow section lock. The doors can be easily combined with our glazed wall and partition system 3050.

Documentation

Product benefits

DIVERSITY OF APPLICATIONS

  • Single-leaf, double-leaf, meeting and folding doors with or without side and top light.
  • Personal safety. Available with anti-finger trap edge.

More information

Fitting Functions

Profile overview

L-shaped glazing bead

Façade type glazing bead

Rectangular glazing bead

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

A = Clear dimension
B = Frame outside dimension
C = Wall opening
D with universal hinge= 123 mm
D with lap butt hinge= 117 mm

Anti-finger trap edge with a rubber strip

A =  Clear dimension
B =  Frame outside dimension

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Glass thickness 5-10 mm

Threshold alternatives

Door openings should be designed without level differences from inside to outside. Sometimes a threshold is not required because of, for example, moisture or non prevailing weather conditions. When a threshold is installed, it should be as low as possible to facilitate passage. Applicable standards and requirements should be taken into account.
              

Door without threshold

Door with embedded threshold

Door with rebate seal against threshold

Door with strip seal

Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Our standard fittings are shown below.

 

Hinges, examples

Universal hinge

Lap butt hinge

Pull handles

D pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 128

Triangular pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 129

Semi-circular pull handle
with hidden mounting harmonises with the door leaf.
Height 300 mm, Ø 30 mm.
Art. no.: Sapa 14 130

Door closing devices

Door closure with arm.
According to supplier.

Sliding rail door closure.
According to supplier.

Built-in door closure.
According to supplier.

Automatic door closure.
According to supplier.

Anti-finger trap protection

In order to reduce the risk of injury due to squeezing, we have developed a solution based on a socalled anti-finger trap edge. Applicable standards and requirements should be taken into account.

Door system 2050 with anti-finger trap edge with EPDM rubber strips.

Elevations And Details

A2050-1030 2122246
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1031 122122232436
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1032 12212223243
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1033 2122247
Save this elevation as: dwg / dxf
Click on number to view the details

Fixing Principles

Fixing principles

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Examples:

Frame attachment with
twist anchor

Frame attachment with
adjustable frame bushing

Frame attachment with
bolt and welded plate

Frame attachment with
screw

Projects using doors SAPA 2050

Angered Arena, Gothenburg

Building and location: New swimming and ice complex in Angered, Gothenburg, Sweden
Construction year: 2013
Architect: Erséus Arkitekter AB
Producer: Alpro Aluminiumfasader AB

Doors: Sapa 2074 and Sapa 2050
Interior sections: Sapa Facade 4150
Fire protection: Sapa Fire Resistant Doors 2074 EI30 and 2074 EI60, Sapa Fire Resistant Panels 3074 EI30
Surface finish: Natural anodised.
Miscellaneous: The perforated cassettes on the building exterior are made of 3 mm aluminium sheet in five colours:
NCS 1010-G, NCS 1510-G, NCS 2010-G,
NCS 2010-B90G and NCS 3010-B90G.
The cassettes are suspended on a system of aluminium L- och Uprofiles designed by Alpro Aluminiumfasader.

Photographer: Hans Bonnevier

Science & Technology Center Santaka, Kaunas

Building: Science & Technology Center Santaka
Location: Kaunas, Lithuania
Construction year: 2011-2013
Architect: G. Janulytė-Bernotienė Studio
Producers: Velansta UAB and Firelita UAB

Facades: Sapa 4150
Windows: Sapa 1074
Doors: Sapa 2074, 2074 fire resistant, 2050
Surface finish: RAL 9016, 7024
Glass: 6 Sun Guard HSN 62/34 – 18 Arg – 33.1 Laminated

Photographer: Hans Bonnevier

Kaisa library building, Helsinki

Building and location: Kaisa library building, Helsinki, Finland
Construction year: 2012
Architect: Anttinen Oiva Arkkitehdit Oy, design team leader Vesa Oiva
Producer: Normek Oy
Developer: Helsinki University

Windows: 1074, special frames 74936 and frame profile 300x80, prof 370060. In total approximately 600 fixed windows.
Doors: Sapa 2050, 2074
Surface finish, powder coating:
External: RAL 9016 matte
Internal: RAL 9016 matte

Photography: Voitto Niemelä

Plassen Cultural Centre, Molde

Facility: Plassen Cultural Centre
Place: Molde, Norway
Construction year: 2011-2012
Architect: 3XN, Copenhagen
Fabricator: H-Produkter AS
Proprietor: Molde Kommune and others

Facades: Sapa 4150 with Add decorative caps
Glazed elements: Sapa 3074, fire rating A60
Doors: Sapa 2050, 2074
Windows: Sapa 1074
Glazed roof: Sapa 5050
Surface finish: Clear anodised
Glass: Suncool Brilliant 70/35 S1 Superenergy

Photography: Hans Bonnevier

AB Strömslunds Snickerifabrik, Skillingaryd

Objekt och ort: AB Strömslunds Snickerifabrik, Skillingaryd, Sweden
Byggår: 2012-2013
Arkitekt: Happy Architects / P-O Bonnevier Arkitektkontor AB
Producent: SKALAB
Montage: Ryds Glas Jönköping
Entreprenör: Pålssons Bygg AB
Ägare: Fastighets AB Strömslunds Snickerifabrik

Fasader: Sapa 4150
Dörrar: Sapa 2074, Sapa 2050
Ytbehandling: Powder Coating, NCS-S 7000-N, NCS-S 1000-N

Photography: Hans Bonnevier

Översättning saknas!

Ranheim School, Trondheim

Facility: Ranheim School
Place: Trondheim, Norway
Construction year: 2010
Architect: Lusparken Architects AS
Fabricator: Ratdal AS

Facades: Sapa 4150, 4150 EI30
Doors: Sapa 2050, 2074, 2074 EI30
Windows: Sapa 1074
Surface finish: Powder coating RAL 7016

Photography: Hans Bonnevier