Doors

SAPA 2050

E-frame

Doorframe for integrated electronics

Characteristics

E-frame, profile with integrated electronic circuits.

Access control system with entry phone, camera, lock and connectors are examples of common components of modern entrance doors.

Our E-frame profile for the 2050 system facilitates wiring as well as the installation and service of the electronic components. The service cover is screwed on through a hidden fixture, which ensures clean appearance and prevents damage.

Sapa 2050 doors with E-frame offer otherwise the same choice of profiles and design solutions as Sapa 2050 doors.

This product is made of Hydro REDUXA® - Aluminum produced from renewable energy. Read more here

Documentation
E_Frame_EN_ProdBrochure2021.pdf

More information

Fitting Functions

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

A = Clear dimension
B = Frame outside dimension
C with universal hinge = 115 mm
C with lap butt hinge= 109 mm

Anti-finger trap edge with a rubber strip

A = Clear dimension
B = Frame outside dimension

E-Frame


Inside, with service cover open

Inside

Outside

Access control systems

Examples of access control systems

Entry phone with display, keypad and proximity card reader         

Entry phone with display

Proximity card reader

Elevations And Details

A2050-1065 12212223243
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1066 12212223243
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1067 1221222324366
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1068 122122232436
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1069 122122232437
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1070 122122232437
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1071 12212223243667
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1072 1221222324367
Save this elevation as: dwg / dxf
Click on number to view the details

Projects using doors SAPA 2050

Angered Arena, Gothenburg

Building and location: New swimming and ice complex in Angered, Gothenburg, Sweden
Construction year: 2013
Architect: Erséus Arkitekter AB
Producer: Alpro Aluminiumfasader AB

Doors: Sapa 2074 and Sapa 2050
Interior sections: Sapa Facade 4150
Fire protection: Sapa Fire Resistant Doors 2074 EI30 and 2074 EI60, Sapa Fire Resistant Panels 3074 EI30
Surface finish: Natural anodised.
Miscellaneous: The perforated cassettes on the building exterior are made of 3 mm aluminium sheet in five colours:
NCS 1010-G, NCS 1510-G, NCS 2010-G,
NCS 2010-B90G and NCS 3010-B90G.
The cassettes are suspended on a system of aluminium L- och Uprofiles designed by Alpro Aluminiumfasader.

Photographer: Hans Bonnevier

Science & Technology Center Santaka, Kaunas

Building: Science & Technology Center Santaka
Location: Kaunas, Lithuania
Construction year: 2011-2013
Architect: G. Janulytė-Bernotienė Studio
Producers: Velansta UAB and Firelita UAB

Facades: Sapa 4150
Windows: Sapa 1074
Doors: Sapa 2074, 2074 fire resistant, 2050
Surface finish: RAL 9016, 7024
Glass: 6 Sun Guard HSN 62/34 – 18 Arg – 33.1 Laminated

Photographer: Hans Bonnevier

Kaisa library building, Helsinki

Building and location: Kaisa library building, Helsinki, Finland
Construction year: 2012
Architect: Anttinen Oiva Arkkitehdit Oy, design team leader Vesa Oiva
Producer: Normek Oy
Developer: Helsinki University

Windows: 1074, special frames 74936 and frame profile 300x80, prof 370060. In total approximately 600 fixed windows.
Doors: Sapa 2050, 2074
Surface finish, powder coating:
External: RAL 9016 matte
Internal: RAL 9016 matte

Photography: Voitto Niemelä

Plassen Cultural Centre, Molde

Facility: Plassen Cultural Centre
Place: Molde, Norway
Construction year: 2011-2012
Architect: 3XN, Copenhagen
Fabricator: H-Produkter AS
Proprietor: Molde Kommune and others

Facades: Sapa 4150 with Add decorative caps
Glazed elements: Sapa 3074, fire rating A60
Doors: Sapa 2050, 2074
Windows: Sapa 1074
Glazed roof: Sapa 5050
Surface finish: Clear anodised
Glass: Suncool Brilliant 70/35 S1 Superenergy

Photography: Hans Bonnevier

AB Strömslunds Snickerifabrik, Skillingaryd

Objekt och ort: AB Strömslunds Snickerifabrik, Skillingaryd, Sweden
Byggår: 2012-2013
Arkitekt: Happy Architects / P-O Bonnevier Arkitektkontor AB
Producent: SKALAB
Montage: Ryds Glas Jönköping
Entreprenör: Pålssons Bygg AB
Ägare: Fastighets AB Strömslunds Snickerifabrik

Fasader: Sapa 4150
Dörrar: Sapa 2074, Sapa 2050
Ytbehandling: Powder Coating, NCS-S 7000-N, NCS-S 1000-N

Photography: Hans Bonnevier

Översättning saknas!

Ranheim School, Trondheim

Facility: Ranheim School
Place: Trondheim, Norway
Construction year: 2010
Architect: Lusparken Architects AS
Fabricator: Ratdal AS

Facades: Sapa 4150, 4150 EI30
Doors: Sapa 2050, 2074, 2074 EI30
Windows: Sapa 1074
Surface finish: Powder coating RAL 7016

Photography: Hans Bonnevier