Fire Protection

A 30

Sapa Door 2060 (EI 15, A 30, E 30, EI 30)

Single glass pane

Characteristics

Glazed doors based on uninsulated aluminium profiles with a profile depth of 60 mm. Fire rated elements shall be made using fire rated glass or infill panels approved for the building system.

The doors have door leaf profiles suitable for narrow section locks and maximum door leaf dimensions of 1285 x 2240 mm. For double-leaf doors the maximum outside width of the door leafs is 2100 mm.

Thresholds are available in various versions, the doors can also be installed without a threshold with a 10 mm gap under the bottom edge. The doors can be designed with anti-finger trap.

Doors with a horizontal cross-bar meet the requirements for separating elements in fire rating classes E30, EI15 and A30. If a safety distance of 1 m is ensured, doors with a cross-bar meet class EI30 requirements.
Doors without a cross-bar meet the requirements for fire separation class EI30.

Type approval certificate no. 1199/94

For more information about fire protection, fire rating, regulations and general guidelines, see Swedish construction regulations BBR, chapter 5.

Documentation
SAPA 2060 E30_DataSheet_BA.pdf

More information

Fitting Functions

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to allow passage in a wheel chair. Even other openings in transfer routes shall be designed so as to allow passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

A = Clear dimension
B = Frame outside dimension
C = Wall opening

D with universal hinge= 128 mm

Infill panels

Certain parts of the door leaf or the side light can or must be filled with infill panels. It is important to consider the surface layer and the backing of the panels. The infill panels listed below meet the requirements for the applicable fire rating class.

Infill panel Stp-G 27-34 mm

Gypsum boards or equivalent with surface layer made of steel sheet or stainless steel sheet.
Max. dimensions, W x H: 600 x 2400 mm, 1100 x 1100 mm
Max. side light dimensions, W x H: 2100 x 800 mm

Infill panel Alp-G 27-34 mm

Gypsum boards or equivalent with surface layer made of aluminium sheet.
Max dimension b x h: 600 x 2400 mm, 1100 x 1100 mm
Max. side light dimensions, W x H: 2100 x 800 mm

Elevations And Details

A2060-1043 21222324
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1044 212223246
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1045 13212224
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1046 132122246
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1060 21
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1061 2122
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1062 2122
Save this elevation as: dwg / dxf
Click on number to view the details
A2060-1063 2122
Save this elevation as: dwg / dxf
Click on number to view the details