Fire Protection

E 30

Sapa Door 2050/Glazed Elements 3050 (E 30)

Single glass pane

Characteristics

Glazed doors and wall elements based on uninsulated aluminium profiles with a profile depth of 50 mm. Fire rated elements shall be made using fire rated glass or infill panels approved for the building system.

The doors can be made of door leaf profiles suitable for all types of locks with maximum door leaf dimensions of 1285 x 2140 mm. For double-leaf doors the maximum outside width of the door leafs is 2100 mm.

Thresholds are available in various versions, the doors can also be installed without a threshold with a 10 mm gap under the bottom edge.

Glazed wall elements can have a maximum length of 10000 mm and a maximum height of 2200 mm.

The choice of framework profiles range from 74 mm to 172 mm. For vertical extension there are special profiles that are made as dividing profiles.

Type approval certificate no. 1199/94

For more information about fire protection, fire rating, regulations and general guidelines, see Swedish construction regulations BBR, chapter 5.

Documentation
SAPA 2050 E30_DataSheet_BA.pdf

More information

Fitting Functions

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to allow passage in a wheel chair. Even other openings in transfer routes shall be designed so as to allow passage in a wheel chair. Applicable standards and requirements should be taken into account. In escape routes the regulations regarding the opening dimensions must be adhered to as well.

Rebate door


A = Clear Dimension
B = Frame outside dimension
C = Wall opening
D = 115 mm

Infill panels

Certain parts of the door leaf or the side light can or must be filled with infill panels. It is important to consider the surface layer and the backing of the panels. The infill panels listed below meet the requirements for the applicable fire rating class.

Infill panel Stp-G 27-34 mm

Gypsum boards or equivalent with surface layer made of steel sheet or stainless steel sheet.
Max. dimensions, W x H: 600 x 2400 mm, 1100 x 1100 mm
Max. side light dimensions, W x H: 2100 x 800 mm

Infill panel Alp-G 27-34 mm

Gypsum boards or equivalent with surface layer made of steel sheet or stainless steel sheet.
Max. dimensions, W x H: 600 x 2400 mm, 1100 x 1100 mm
Max. side light dimensions, W x H: 2100 x 800 mm

Elevations And Details

A2050-1045 21222324
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1046 212223246
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1047 132122246
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1048 1212223249
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1049 11321222469
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1050 12212223243469
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1051 12212223243566
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1052 11322122243566
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1053 12356
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1054 12356
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1055 123
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1034 21
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1035 2122
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1036 123
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1037 2122
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1038 2122
Save this elevation as: dwg / dxf
Click on number to view the details
A2050-1039 123
Save this elevation as: dwg / dxf
Click on number to view the details