SAPA 2060

Clear dimension

Doors and entries should be designed with enough space (clear dimension) for person traffic and to facilitate passage in a wheel chair. Applicable standards and requirements should be taken into account.

Rebate door

A = Clear dimension
B = Frame outside dimension
C = Wall opening
D with universal hinge= 128 mm
D with lap butt hinge= 118 mm

Rounded anti-finger trap edge

A =  Clear dimension
B =  Frame outside dimension

Anti-finger trap back edge with a rubber strip

A =  Clear dimension
B =  Frame outside dimension

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Functional dimensions
Glass thickness 3-33 mm

The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Glazing
Glass thickness 3-33 mm

Infill panels

Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.

Infill panel F2
1,5 mm Aluminium sheet
3,2 mm Board
25 mm Insulation
3,2 mm Board
1,5 mm Aluminium sheet

Infill panel F3
1,5 mm Aluminium sheet
12 mm Chipboard
20 mm Insulation
1,5 mm Aluminium sheet

Infill panel F4
1,5 mm Aluminium sheet
20 mm Insulation
10 mm Sapa boarding

Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Our standard fittings are shown below.

Hinges, example

Universal hinge

Lap butt hinge.

Threshold alternatives

Door openings should be designed without level differences from inside to outside. Sometimes a threshold is not required because of, for example, moisture or non prevailing weather conditions. When a threshold is installed, it should be as low as possible to facilitate passage. Applicable standards and requirements should be taken into account.

Door without threshold

Door with embedded threshold

Door with rebate seal
against threshold

Door with strip seal

Anti-finger trap protection

In order to reduce the risk of injury due to squeezing, we have developed two solutions based on a socalled anti-finger trap edge. Applicable standards and requirements should be taken into account.

Door system 2060 with anti-finger trap edge with EPDM rubber strips.

Door system with anti-finger trap edge made of a rounded aluminium profile.

Break-out protection

In order to reduce the risk of burglary through doors, we have developed rebate profiles with integrated break-out protection. The break-out protection profile is easy to replace if damage occurs. It is available for inward and outward opening doors as well as for meeting doors. Clear anodising is recommended for optimum appearance.

Example:

Inward opening 2060 door with break-out protection

Outward opening 2060 door with break-out protection

Fixing principles

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Examples:

Frame attachment with
twist anchor

Frame attachment with
adjustable frame bushing

Frame attachment with
bolt and welded plate

Frame attachment with
screw